Wheelbase(mm / in.) | 320mm(min)/330mm(max) |
---|---|
Weight(g/ lbs.) | 3160g |
Length(mm / in.) | 490mm |
Width(mm / in.) | 305mm |
Height(mm / in.) | 180mm |
Ground Clearance(mm / in.) | |
Drive train/Pulley ratio | 12.7:1 |
Motor | 2000KV Brushless Motor |
Enigine |
Suspension Based On National ROAR Champion- EB4
S3
* Compatible with most EB4 S3 series parts
* Heavy Duty Steel Diff
Ring/ Pinion
* Adjustable Steel Turnbuckles
* Compact Molded Chassis Brace
And Cover
* New Hi-Flow Dynamic Body
* CNC Machined Aluminum Motor
Mount
* CNC Machined Steel Pinion Gear
* Equipped Front/Center CVD Drive
Shafts
* ACE RC Brushless Power System for 1:8 Scale Car
* Center Drive
Shaft Guard For Cable Protection
* High Current Super Deans Plugs
Included
* Anodized Aluminum Oil-Filled Shocks
* 17mm Aluminum Wheel
Hubs
* Rear, Center and Front Fluid Filled Differentials
* S2008MG Metal
Gear High Torque Servo For Steering
Ready Set- The new EB4 G3 is
offered in a completely ready to go form. All components are pre-assembled,
all you have to do is to add your battery packs of choice for the club’s
smack down. The EB4 G3 comes equipped with an ACE RC BLC-80C race spec
ESC and super torque 2000KV motor combo, front and center CVD universals, all
fluid filled differentials, 17mm wheel hubs to mach up its powerful output.
Transmission- The front and rear transmission of EB4 G3 is the
same as the ROAR national champion, the nitro EB4 S3, which comes equipped with
a hardened steel differential rings that makes stripping a gear a barely mission
impossible. All the diffs contain a full set of steel diff gears and diff fluid
inside in combination with full set of bearings throughout the drive train to
ensure the most smooth power transmission.
Suspension- The front
and rear suspension uses the same race proven composite nylon suspension arms as
the nitro EB4 S3. The shock bodies are made of anodized aluminum with quick
adjustment clips for ease of changes. The shock towers are made from 4mm thick
aluminum plate with multiple shock mounting positions and the whole chassis is
strongly stiffened with a compact molded chassis brace and cover. You can also
fine tune for the optimal camber and toe setting with adjustable turnbuckles and
suspension blocks for your demanding cornering and overall
handling.
Brushless Power- The power system
is equipped with a powerful 80A ESC and a 2000KV super
brushless motor that will give EB4 G3 super fast speed and huge
torque. But the most important thing is that the ACE RC brushless power
system enables you a longer play time due to less friction in the
brushless motor comparing to other RTRs. Other multiple protection
features, like low voltage cut-off protection, over-heat protection, throttle
signal loss protection, motor blocked protection and splash/dust proof cover are
just making the ESC bullet-proof.
제조사 | - | 원산지 | - |
---|---|---|---|
브랜드 | THUNDER TIGER | 모델명 | - |