FEATURES: Chassis: Anodized aluminum alloy 0.12" (3mm)
thick Drive: Four wheel shaft drive fully ballraced
Engine: Pro-18BX 18cu in (3.0cc) with pull starter (TTRG0018),
glow plug and foam air filter Exhaust: Aluminum
tuned pipe, polished natural finish Radio: 2 channel 2.4GHz pistol
grip and standard size servo, transmitter has charge
jack Bumper: Front foam Differentials: Bevel
gear Transmission: Single speed Clutch: Two shoe
composite Steering: Bellcrank type with servo saver
Shocks: Composite body, oil filled Body: BMW M3 coupe trimmed and
painted with decals for lights, grille and body trim
Wheels: Black plastic 1.02" (52mm) diameter, 1.02" (26mm)
wide Tires: Rubber 1.02" (26mm) wide, 2" (52mm) diameter with
foam inserts Ball Bearings: Full set,
sealed Suspension: Double wishbone Caster:
Non-adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to
the chassis Camber: Non-adjustable front and rear, camber refers to
the angle of the tops of the tires from vertical when viewed from
front or behind vehicle Warranty: Thunder Tiger
guarantees this truck to be free from defects in both material
and workmanship. This warranty does not cover any components
damaged by use or modification. A part or parts missing from the
kit must be reported within 60 days of purchase. No part or parts
will be sent under warranty without proof of purchase
INCLUDES: RTR 1/10 scale Tomahawk MX Touring Car with
.18 cu in engine, 2.4GHz radio, painted body and instruction
manual
REQUIRES: Fuel: 20% lubricant and 10-30% nitro
content, synthetic/castor blend lubricant recommended (do not use
more than 10% nitro content for break-in) AA
Batteries: 12, 8 for transmitter 4 for battery box Building and
track equipment
SPECS: Vehicle; Length: 17"
(432mm) Width: 7.87" (200mm) Height: 4.33"
(110mm) Weight: 3.63lbs (1650g) Wheelbase: 9.72 -
10.43" (247 - 265mm) Body; Length: 17.1"
(434mm) Width: 8.1" (205mm) Height: 4" (102mm)
|