E2017 - MGT7 Nitro GT On-Road
Car |
|
|
The MGT7 front and rear shock towers were designed to optimize the
handling and tuning of the 16mm shocks and to provide traction and smooth
handling on asphalt. The durable front and rear gear differentials will handle
any high-powered nitro engines and keep the MGT7 under full control. The drive
train is very efficient with CVA’s drive shafts through out the kit. The
combination of the high quality differentials and super efficient drive train
allows the MGT7 to carry high speeds on the straights and through the
corners. |
|
|
|
|
|
Specially
designed front and rear body mounts with full adjustability to allow the fit of
most bodies. The large front plastic bumper with foam protector will help keep
the front of the body front tucking during hard impact. Tough side guards keep
both your pipe and radio gear protected from high-speed on-road racing. |
|
|
|
|
|
The 2-speed included with the MGT7 comes from our World Champion
MRX5 kit which is easy to adjust and very reliable. A 2-speed clutch bell with
Mugen’s high-end aluminum 3-shoe clutch is standard with the MGT7 so you can get
consistent shifts during long runs. Many different option gear ratios for both
pinion and spurs gears will be available so you can fine-tune the MGT7 for
maximum performance. |
|
|
|
|
As you can see
this is a new category for Mugen and its MGT7. Mugen has used only the best
components from both our off road and on road lines have been combined to create
the ultimate grand touring car….the MGT7!!!
|
|
MGT7 Features:
|
|
|
|
|
- Straight cut 12T bevel gear and 42T conical
gears |
- Front/Rear 16mm hard anodized threaded
shocks with 3.5 shocks shafts |
- Specially designed front/rear shock
springs
|
- 3mm A7075 aluminum chassis |
- 4mm A7075 aluminum front/rear shock
towers
|
- 5mm A7075 aluminum lower suspension mounts
for optimized geometry |
- 150cc capacity fuel tank |
- E0710 heavy duty aluminum clutch
shoes |
- Fully adjustable 2 speed gear box |
- Specially designed front/rear body
mounts |
- New front bumper and foam protector
|
| |
|
MGT7 Technical
data: |
|
|
- Length: |
|
494mm |
- Width: |
|
305mm |
- Weight: |
|
Approx. 3600gr |
- Gear ratio: |
|
1st. 11.43/2nd. 8.47 |
- Wheelbase: |
|
325mm | |
|
|
Differentials Oils:
|
|
|
Front - 300,000 wt Oil
(B0347) Rear - 50,000 wt Oil (B0319) |
|
Shocks, Springs, and Sway
Bars: |
|
Front: 600 wt Oil (B0326) / φ2.2
L40/5.25T Spring (E2545) / φ1.35 5H Piston (E2534) / φ2.7mm
(E2136) Rear: 600 wt Oil (B0326) / φ2.2 L40/5.25T Spring (E2545) / φ1.35
5H Piston (E2534) / φ2.6mm (E0176)
|